Crimpgimp
The Crimpgimp is our most compact, multi-functional hold for training finger strength. With over 7 different gripping positions and a single bolt rotating setup, this training hold easily surpasses a traditional hangboard. You can use the Crimpgimp in these three ways:
- Easy mode. This gives you a medium sized flat hold, sloper and crimper
- Hard mode. This gives you a small sized flat hold, sloper, crimper and slopy crimper.
- Superman mode: This allows you to pinch the holds or take them sideways to train your shoulder or compression strength.
Don't have a bolt on wall at home? Check out the Basewood for your ultimate home climbing wall. Using the Basewood to mount the Crimpgimp on allows you to easily change the shoulder width of the holds, put one hold higher than the other for uneven loads and ofcourse allows you to spin the holds, using the one-bolt-setup.
Key Features:
- 7 gripping positions ranging from medium to very challenging
- 1 bolt mounting, allowing easy spinning between grips.
- Increases finger and upper body strength
Set includes:
-
2 x Crimpgimp hold
-
2 x M10 bolt and T-nuts
-
selection from 3 standard colours and 8 special colours
*This polyurethane hold is designed according to the NEN-EN 12572-3-2008 standard, assuring a strong and reliable design.
The Crimpgimp is our most compact, multi-functional hold for training finger strength. With over 7 different gripping positions and a single bolt rotating setup, this training hold easily surpasses a traditional hangboard. You can use the Crimpgimp in these three ways:
- Easy mode. This gives you a medium sized flat hold, sloper and crimper
- Hard mode. This gives you a small sized flat hold, sloper, crimper and slopy crimper.
- Superman mode: This allows you to pinch the holds or take them sideways to train your shoulder or compression strength.
Don't have a bolt on wall at home? Check out the Basewood for your ultimate home climbing wall. Using the Basewood to mount the Crimpgimp on allows you to easily change the shoulder width of the holds, put one hold higher than the other for uneven loads and ofcourse allows you to spin the holds, using the one-bolt-setup.
Key Features:
- 7 gripping positions ranging from medium to very challenging
- 1 bolt mounting, allowing easy spinning between grips.
- Increases finger and upper body strength
Set includes:
-
2 x Crimpgimp hold
-
2 x M10 bolt and T-nuts
-
selection from 3 standard colours and 8 special colours
*This polyurethane hold is designed according to the NEN-EN 12572-3-2008 standard, assuring a strong and reliable design.
Countries within EU:
Delivery within 3 days
Order > 50€ ; free shipping in Belgium, Netherlands, France, Germany and Luxembourg
Order > 100€; free shipping in EU
USA:
Delivery within 1-2 weeks
Standard shipping fee and reduced shipping fee for orders over 150 Euro
For countries outside EU, USA: If the shipping price is not available please Contact us ("Ask a question" section) so we can calculate exact shipping cost to your address and add it to the website.
Potential import fees for countries outside EU are not included in the shipping cost and are at the expens of the customer
Countries within EU:
Delivery within 3 days
Order > 50€ ; free shipping in Belgium, Netherlands, France, Germany and Luxembourg
Order > 100€; free shipping in EU
USA:
Delivery within 1-2 weeks
Standard shipping fee and reduced shipping fee for orders over 150 Euro
For countries outside EU, USA: If the shipping price is not available please Contact us ("Ask a question" section) so we can calculate exact shipping cost to your address and add it to the website.
Potential import fees for countries outside EU are not included in the shipping cost and are at the expens of the customer
Crimpgimp
The Crimpgimp is our most compact, multi-functional hold for training finger strength. With over 7 different gripping positions and a single bolt rotating setup, this training hold easily surpasses a traditional hangboard. You can use the Crimpgimp in these three ways:
- Easy mode. This gives you a medium sized flat hold, sloper and crimper
- Hard mode. This gives you a small sized flat hold, sloper, crimper and slopy crimper.
- Superman mode: This allows you to pinch the holds or take them sideways to train your shoulder or compression strength.
Don't have a bolt on wall at home? Check out the Basewood for your ultimate home climbing wall. Using the Basewood to mount the Crimpgimp on allows you to easily change the shoulder width of the holds, put one hold higher than the other for uneven loads and ofcourse allows you to spin the holds, using the one-bolt-setup.
Key Features:
- 7 gripping positions ranging from medium to very challenging
- 1 bolt mounting, allowing easy spinning between grips.
- Increases finger and upper body strength
Set includes:
-
2 x Crimpgimp hold
-
2 x M10 bolt and T-nuts
-
selection from 3 standard colours and 8 special colours
*This polyurethane hold is designed according to the NEN-EN 12572-3-2008 standard, assuring a strong and reliable design.
The Crimpgimp is our most compact, multi-functional hold for training finger strength. With over 7 different gripping positions and a single bolt rotating setup, this training hold easily surpasses a traditional hangboard. You can use the Crimpgimp in these three ways:
- Easy mode. This gives you a medium sized flat hold, sloper and crimper
- Hard mode. This gives you a small sized flat hold, sloper, crimper and slopy crimper.
- Superman mode: This allows you to pinch the holds or take them sideways to train your shoulder or compression strength.
Don't have a bolt on wall at home? Check out the Basewood for your ultimate home climbing wall. Using the Basewood to mount the Crimpgimp on allows you to easily change the shoulder width of the holds, put one hold higher than the other for uneven loads and ofcourse allows you to spin the holds, using the one-bolt-setup.
Key Features:
- 7 gripping positions ranging from medium to very challenging
- 1 bolt mounting, allowing easy spinning between grips.
- Increases finger and upper body strength
Set includes:
-
2 x Crimpgimp hold
-
2 x M10 bolt and T-nuts
-
selection from 3 standard colours and 8 special colours
*This polyurethane hold is designed according to the NEN-EN 12572-3-2008 standard, assuring a strong and reliable design.
Countries within EU:
Delivery within 3 days
Order > 50€ ; free shipping in Belgium, Netherlands, France, Germany and Luxembourg
Order > 100€; free shipping in EU
USA:
Delivery within 1-2 weeks
Standard shipping fee and reduced shipping fee for orders over 150 Euro
For countries outside EU, USA: If the shipping price is not available please Contact us ("Ask a question" section) so we can calculate exact shipping cost to your address and add it to the website.
Potential import fees for countries outside EU are not included in the shipping cost and are at the expens of the customer
Countries within EU:
Delivery within 3 days
Order > 50€ ; free shipping in Belgium, Netherlands, France, Germany and Luxembourg
Order > 100€; free shipping in EU
USA:
Delivery within 1-2 weeks
Standard shipping fee and reduced shipping fee for orders over 150 Euro
For countries outside EU, USA: If the shipping price is not available please Contact us ("Ask a question" section) so we can calculate exact shipping cost to your address and add it to the website.
Potential import fees for countries outside EU are not included in the shipping cost and are at the expens of the customer
